1, check the screw or nut is loose.
2, the appropriateness of the belt tension.
3, pipes is normal, the oil level is appropriate.
4, wiring and electrical switches in order, boundaries are correct.
5, each round of the footing has been stable or fixed.
6, compressed pulley is easily hand turning.
7, compressor work, best idling more than 2-3 minutes, and normal operations.
8, check the running and direction indicating arrows refer to the same, if not identical, three power supply three-phase motors can be any two transpositions.
9, should always check whether there is pollution of air, filter to remove cleaning (gas oil) or replaced, to maintain good air filter effects.
10, a day after the air compressor, Rotary open sewage valve, condensate water and oil in the barrel, completely removed.
11, air compressor cylinder head and brass sections, for compressed air and heat, temperatures are very high, this is an inevitable phenomenon is not present.
12, air compressor in operation if a power outage or after use, be sure to cut off the power supply to ensure safety.
Related Industry Knowledge
- Piston air compressor
- Piston air compressor operation
- Oil-free air compressor
- Oil-free air compressor works
- Open air compressor industry growth...
- High pressure air compressor
- Piston compressor working principles
- Working principle
- Use of high pressure air compressor
- High pressure air compressors work ...
- When choosing a compressor